Generalmusic RealPiano RP150, Руководство пользователя

Страница: 33 / 76

29
4. Reverb Send (Rev. Send)
Press the PAGE UP button to pass to the Rev. Send function.
If a Reverb effect has been selected (Reverb button on), the Rev Send
function can be used to independently control the amount of reverb
applied to a section (Single, Split or Layer) of the current Preset.
For example, the single Preset GrandPiano recalls a reverb send of 64 (a
moderate reverb amount), the Layer section (Strings) is programmed at
90 (to give more depth to the sound) and the Split section (Ac.Bass) plays
with a Rev Send value of 0.
Note: the following examples can be heard on your instrument only if the
Reverb button is selected (LED on).
The status of the Rev Send setting is shown as follows:
4 REV. SEND
’’’’’‘ 64
To apply more or less Rev Send to the currently displayed section, press
the DATA + or – buttons.
Press the LAYER button (LED on) followed by PAGE Up to activate the
Layer screen (identified by the letter “L”).
4L REV. SEND
‘‘‘‘‘‘‘‘‘‘‘ 90
Press the SPLIT button (LED on) followed by PAGE Up to activate the
Split screen (identified by the letter “S”).
4S REV. SEND
0
NOTE: When you pass directly from Layer to Split situations (or vice-
versa), there is no need to press the Page Up button to see the relative
display.
Holding down the DATA + or – button increases or decreases the Rev
Send value rapidly and stops instantly after release.
A maximum value of 127 or a minimum value of 0 can be obtained. The
“0” setting corresponds to no Reverb.