En-14
Example:
When set to turn on 6 hours
after setting.
0.5
1.0
9.0
9.5
10
11
12 (hours)
1.5
To Stop Air Conditioner Operation
while the Timer is Operating
ON TIMER
(Begins air conditioner operation at the set time)
1
Press the START/STOP button
(if the unit is already operating, proceed to step
2).
The indoor unit’s green OPERATION lamp will light.
2
Press ON button on the row under TIMER and
hold until desired time display.
When ON button is pressed, the display will change from thermostat
setting to TIMER display.
Each time the button is pressed the time will change in the following
order.
*
0.5H is 30 minutes ( such as : 1.5 H is 1 hour and 30 minutes)
●
Set the time while ON TIMER (
) is flashing on remote control
display (flashing about 30 seconds)
3
Press SET button on the row under TIMER to set
“ON TIMER”.
●
“ON TIMER” (
) will be displayed on remote control.
●
The indoor unit's yellow TIMER lamp will light.
●
ON TIMER button cannot operate while OFF TIMER is working and
vice versa.
If you wish to change operating con-
ditions (Mode, Fan Speed, Thermostat
Setting), after making the timer setting
wait until the entire display reappears,
then press the appropriate buttons to
change the operating condition desired.
To Change Operating Conditions
Press the START/STOP button.
9385175310_OM_en.p65
13/12/2011, 1:16 PM
14