En-11
s
s
s
s
To Set the Thermostat
Press the TEMPERATURE set button.
button: Press to increase the thermostat setting.
button: Press to lower the thermostat setting.
●
Thermostat setting range:
Cooling/Drying .................................................................................. 18 to 30 °C
Fan ..................................................................................................... 17 to 30 °C
●
When set “_ _” during operating fan mode, the air conditioner will work
upon current room temperature.
About three seconds later, the entire display will reappear.
NOTE:
●
The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
●
The thermostat cannot be used to set room temperature during the FAN mode
(the temperature will not appear on the remote control unit’s display).
●
During Cooling/Drying mode:
Set the thermostat to a temperature setting that is lower than the current room
temperature. The Cooling and Drying modes will not operate if the thermostat
is set higher than the actual room temperature (in Cooling mode, the fan alone
will operate).
To Set the Fan Speed
Press the FAN CONTROL button.
Each time the button is pressed, the fan speed changes in the following order:
AUTO
HIGH
MED
LOW
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling:
Operation begins and as the room temperature approaches that of the
thermostat setting, the fan speed switches to the low setting.
Fan:
Fan operates to produce optimum air flow for the current room tem-
perature in the vicinity of the air conditioner.
To Stop Operation
Press the START/STOP button.
Example:
When set to 26 °C
Example:
When set to AUTO
9385175310_OM_en.p65
13/12/2011, 1:16 PM
11