
En-3
Operating Control Panel and Indicator Lamps
MANUAL AUTO button
This button can be used for temporary operation in the
AUTOMATIC mode in the event the remote control unit
is unavailable. (
☞
P.8~9)
Press the MANUAL AUTO button
●
Fan speed will be set to “AUTO” and the thermostat
will be set for “normal”.
●
To stop operation, either press the MANUAL AUTO
button once again.
OPERATION Indicator (Green)
●
Lights when unit is operating.
●
Flashes quickly for about one second when a signal
is received from the remote control unit.
TIMER Indicator (Yellow)
Lights during ON TIMER, OFF TIMER.
(That the power supply cut at first with power failure
etc., in the case that an operation lamp and a timer
lamp are lighted alternately is shown.) (
☞
P.13)
SUPER WAVE Switch (Orange)
Lights during SUPER WAVE working. (
☞
P.12)
SUPER
WAVE
OPERATION TIMER
SUPER
WAVE
MANUAL
AUTO
OPERATION TIMER
9385175310_OM_en.p65
13/12/2011, 1:15 PM
3