En-4
NAME AND FUNCTION OF PARTS
Remote Control Unit
4
5
6
7
3
A
0
1
2
B
8
9
1
MASTER CONTROL button
Press to select operating mode (AUTO, COOL, DRY,
FAN).
2
SET TEMP. buttons (
/
)
Press to set the unit’s thermostat.
3
START/STOP button
Press to start and stop operation.
4
Signal Transmitter
Control signals are sent to the air conditioner from
here.
5
FAN CONTROL button
Press to select fan speed. (AUTO, HIGH, MED, LOW).
6
SUPER WAVE button (
☞
P.12)
Use to set the desired airflow direction.
7
ACL button (located inside battery
compartment)
This button is used when replacing batteries.
8
OFF TIMER button (
☞
P.13)
Use to set time for OFF the air conditioner.
9
ON TIMER button (
☞
P.14)
Use to set time for ON the air conditioner.
0
SET TIMER button
Press to send the timer signal to the air conditioner.
A
CANCEL button
Press to cancel the setting time.
B
TEST RUN button
This button is used when testing the air conditioner
after installation. Do not use under normal condition.
9385175310_OM_en.p65
13/12/2011, 1:15 PM
4