En-9
s
s
s
s
To Set the Thermostat
Example:
When set to “normal”
Example:
When set to AUTO
Press the TEMPERATURE set button.
When set to
When set to
When set to
When set to
When set to
2K (2 °C) lower
1K (1 °C) lower
“normal”
1K (1 °C) higher
2K (2 °C) higher
About three seconds later, the entire display will reappear.
NOTE:
The thermostat setting should be considered a standard value, and may
differ somewhat from the actual room temperature.
To Change the Fan Speed
Press the FAN CONTROL button.
Each time the button is pressed, the fan speed changes in the following order:
AUTO
HIGH
MED
LOW
About three seconds later, the entire display will reappear.
When the FAN CONTROL is set to AUTO:
COOL:
Operation begins and as the room temperature approaches that of the
thermostat setting, the fan speed switches to the low setting.
To Stop Operation
Press the START/STOP button.
9385175310_OM_en.p65
13/12/2011, 1:15 PM
9