General 90-125 M1, Руководство по установке и эксплуатации, Страница: 8 / 42

LIST OF CONTENTS
Once the parts have been removed from the packag-
ing, you should have the following items:
QTY
BANDSAW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
MITER GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
BASE CABINET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE BAG (INSIDE BASE CABINET)
— DOOR KNOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
— DOOR BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
TABLE & TRUNNIONS . . . . . . . . . . . . . . . . . . . . . . . . . .1
FENCE BODY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE BAG
— HEX BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
— FLAT WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
SLIDE BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
TABLE-TILT BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . .1
TENSION LEVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
DUST PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE BAG
— POWER CORD HOOK . . . . . . . . . . . . . . . . . . . . . .2
— LOCK KNOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
— HEX HEAD BOLT . . . . . . . . . . . . . . . . . . . . . . . . . . .4
— FLAT WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
— HEX NUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
— SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
— HEX HEAD BOLT (LONG) . . . . . . . . . . . . . . . . . . .1
— 5 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 3 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 10 MM COMBINATION WRENCH . . . . . . . . . . . . .1
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
UNPACKING
ADDITIONAL REQUIREMENTS FOR SET UP
• Extra person for help with lifting
• Phillips screwdriver (regular and small)
• Flat head screwdriver
•
12 mm Open end wrench
•
12 mm and 10 mm Hex socket
• Feeler gauge set
• Combination square
8