Page 18
HF SERIES
Serial #10127003 and Later
GENERAL PUMP
A member of the Interpump Group
Transmission can be carried out:
• By means of the V-belt
• By means of the joint
By means of the V-belts, withdraw-able Max Torque is:
14.61 Ft lbs (65 N) which corresponds to:
7 HP at 750 RPM;
7.4 HP at 800 RPM;
8.3 HP at 900 RPM;
9.3 HP at 1000 RPM;
11.1 HP at 1200 RPM.
By means of the joint, withdraw-able Max Torque is:
29.23 Ft lbs (130 N) which corresponds to:
14 HP at 750 RPM;
14.8 HP at 800 RPM;
16.6 HP at 900 RPM;
18.6 HP at 1000 RPM;
22.2 HP at 1200 RPM.
By means of V-belt, the transmission id considered suitable if: belt pull is applied at a max dis-
tance of 0.87 in (22 mm) from the bend shaft shoulder fig. 13 Min diameter of pulley to be
used = Ø 100 mm.
With transmission by means of the joint, pay particular attention to perfect alignment so that no
transverse forces are generated on the pump shaft.
Fig. 13
For applications differing from those specified above, contact our
Customer Serivce
Department.
Ref 300764 Rev. F
05-21
