Page 12
Serial #10127003 and Later
HF SERIES
GENERAL PUMP
A member of the Interpump Group
All pumps require a suitable filter. The filter should be installed as close as possible to the pump, should allow easy
inspection and have the following characteristics:
1. The filter capacity should be at least three times the rated pump volume.
2. Filter port diameters should not be smaller than the pump inlet ports.
3. Filtration degree in between 50 and 80 mesh (360 to 200 microns).
For smooth pump operation, regular filter cleaning is necessary, planned according to the actual use of
the pump in relation to the quality of water used and actual clogging conditions.
9.7 Filtration
Ref 300764 Rev. F
05-21
