General Monitors FL3112, Руководство пользователя

Страница: 33 / 41

Model FL3112
28
R – indicates Read Only Access R/W – indicates Read/Write Access
LFF – Low Frequency Fire HFF – High Frequency Fire
LFS – Low Frequency Sun
Master
Reg I/O Refer to
Parameter Function Type Scale Access Addr Addr Section
Remote Alarm Remotely Activates Alarm Bit 1-Bit R/W 0012 40019 7-7-15
Test Test
Clear COPM
Clears Window/Detector Bit 1-Bit R/W 0013 40020 7-7-16
Faults COPM Fault Counters
Total Receive Total No. of Receive Errors
Value 8-Bit R 0020 40033 7-7-17
Errors
Bus Activity
Bus Activity Rate in % Dec. (0-100%) R 0021 40034 7-7-18
Rate % of this Addressed Node vs. Hex (0-64)
Other Addressed Nodes
Function Code Total No. of Function Code
Value 8-Bit R 0022 40035 7-7-19
Errors Errors
Starting Address Total No. of Starting Address
Value 8-Bit R 0023 40036 7-7-20
Errors Errors
No. of Register Total No. of Register Errors
Value 8-Bit R 0024 40037 7-7-21
Errors
RXD CRC Lo
Total No. of RXD CRC Lo Value 8-Bit R 0025 40038 7-7-22
Errors Errors
RXD CRC Hi
Total No. of RXD CRC Hi Value 8-Bit R 0026 40039 7-7-23
Errors Errors
Overrun Errors Total No. of Overrun Errors
Value 8-Bit R 0027 40040 7-7-24
Noise Flag
Total No. of Noise Flag Value 8-Bit R 0028 40041 7-7-25
Errors Errors
Framing Errors Total No. of Framing Errors
Value 8-Bit R 0029 40042 7-7-26
Not Used
002A 40043
Not Used
002B 40044
SCI Interrupt
Total No. of Serial Comm Value 8-Bit R 002C 40045 7-6-27
Errors Interface Errors
Clear Comm
Clear All Comm Errors Bit 1-Bit R/W 002D 40046 7-7-28