Checkweigher user’s manual
12
6
Instruction of operation
After correct installation, the device can be operated by touch screen, operation
procedure as follows:
In above operation procedure flow chart, “Product parameter” should be added
before any new product needed to be checked. “Calibration” should be carried out
when the device is installed the first time.
Daily operation
Switch on device
Prerequisites:
- The device has been installed properly and all wires have been connected correctly.
- The operating conditions listed in 2.4 have been fulfilled.
- The operator has been trained and operation procedure must comply with the safety
instructions listed in chapter 3.
- The weighing belt is empty.
Switch on the device at least 20 minutes before start weight
checking.
The pre-run aims to ensure the system reach the correct operating
temperature. Ignore the pre-run may cause negative effect on the
precision of the weighing result.
Fig 6-1 Operation procedure of Checkweigher
Power
Logon
Calibration
PD parameter
Stop
Product
Data
Start
Technician
O
pe
ra
tor
