Checkweigher user’s manual
22
Dynamic study is used to simulate actual product checking procedure. After a
certain number of tests, the device determines physical characters of product to be
checked and records them in system. These characters will be used in actual checking
procedure. Therefore, for a new product, the dynamic study must be carried out after
basic product parameter and length are set correctly.
Dynamic study should be conducted once a new kind of product
need to be checked.
Fig 6-16 Dynamic study interface
Finished dynamic study procedure, it will come to result interface automatically.
In this interface, you can confirm the accuracy of the checkweigher for this product, if
the result is obvious wrong, conduct dynamic study procedure again.
Fig 6-17 Result interface
Press <OK> to save this PD parameter.
Press<New> to add new product or press <OK> to go back to main interface.
Basic maintenance
Prerequisite:
-
Logon with the technician account.
Press <
Maintenance
> in setup interface.
Enter basic maintenance interface, as Fig 6-18.
