General International 75-050T M1, Руководство по установке и эксплуатации

Страница: 8 / 22

UNPACKING
Carefully unpack and remove the mortiser and its com-
ponents from the box and check for damaged or miss-
ing items as per the list of contents below.
NOTE: Please report any damaged or missing items to
your General International distributor immediately.
LIST OF CONTENTS
QTY
MORTISER.......................................................................1
WORKPIECE HOLD-DOWN ............................................1
WORKPIECE STOP ..........................................................1
3/4” SHANK BUSHING ADAPTER....................................1
CHUCK KEY....................................................................1
3 MM ALLEN KEY ...........................................................1
4 MM ALLEN KEY ...........................................................1
5 MM ALLEN KEY ...........................................................1
WORKPIECE CLAMP ......................................................1
1/4” - 6 MM CHISEL AND BIT.........................................1
5/16” - 8 MM CHISEL AND BIT.......................................1
3/8” - 10 MM CHISEL AND BIT.......................................1
1/2” - 13 MM CHISEL AND BIT.......................................1
HEX HEAD BOLT .............................................................2
FLAT WASHER..................................................................2
ADDITIONAL REQUIREMENTS FOR SET UP
• 13 & 17 mm socket or open end wrench
8
BASIC FUNCTIONS
This tilting head hollow chisel mortiser is designed to cut 90° and/or angled mortises in solid wood as well as other
wood based stock.With its tilting, pivoting and extendable height head, the 75-050TM1 is designed to tackle a wide
range of mortising applications suited to both hobbyist and professional users.
Ideal for use in any furniture making or cabinet making applications that require mortise and tenon joinery, the unit
is supplied with a set of 4 different sized chisel and bits to help the user cut mortises of varying widths to suit the appli-
cation. The unit is also supplied with 2 different sized chisel bushings, allowing the user to install chisel and bit sets of
either 5/8" (4 supplied) or 3/4" (commonly available from other after-market sources) shank diameter.
This mortiser is designed to acommodate chisel and bit set sizes ranging from a minimum of 1/4" up to a maximum
of 5/8".
or