General International 75-050T M1 Скачать руководство пользователя

Страница: 1 / 22

FEATURES

Heavy duty cast-iron head, column and
base built for steady vibration free per-
formance.

Head slides on precision machined cast-
iron dovetail ways - stroke is controlled by
a gas head-cylinder for smooth operation.

Head tilts up to 30° left or right for angled
mortising, and pivots up to 180° for off
table mortising.

Adjustable head height extends working
capacity by up to 3” (up to 9” under chis-
el), to accommodate work with taller work-
pieces.

Equipped with easy to adjust dual depth
stop for complete control of both down
stroke depth and upstroke travel.

Large feed handle with extra long, multi-
position arm for better leverage and
increased feed control.

Includes an adjustable workpiece stop,
handwheel controlled clamp and a col-
umn mounted hold-down.

Totally enclosed fan cooled (T.E.F.C.) motor
with start capacitor for smooth start-up
and longer running life.

Dust protected on/off switch.

Includes adapter bushings to accommo-
date both 5/8” and 3/4” sized chisel
shanks.

SPECIFICATIONS

CHISEL CAPACITY
1⁄4” TO 5⁄8” (6 TO 16 MM)

MAXIMUM CHISEL STROKE
9” (228 MM)

DISTANCE FROM FENCE TO CHISEL CENTER
4” (102 MM)

DISTANCE FROM CHISEL TO TABLE

(CHISEL 1/4”)

6” TO 9” (152 MM TO 228 MM)

CHUCK CAPACITY
1⁄2” (13 MM)

FENCE SIZE
14 1/8” X 2 7/8”

TABLE SIZE
13 1/2” X 9” (343 X 230 MM)

BASE SIZE
14 1/8” x 10 3⁄8” (360 x 265 MM)

OVERALL HEIGHT
29” (736 MM)

SPINDLE SPEED
1720 RPM

MOTOR
1/2 HP, 110 V, 1 Ph, 3.8 A

WEIGHT
106 LBS (48 KG)

SETUP & OPERATION MANUAL

5/8” TILTING HEAD HOLLOW

VERSION 2_REVISION 2 - January 27/09
© Copyright General® International 01/2009

CHISEL MORTISER

MODEL

75-050T M1

Содержание 75-050T M1























Результаты поиска

Содержание 75-050T M1

Отзывы:

Похожие инструкции для 75-050T M1

Бренды по названию

Популярные бренды

General International 75-050T M1, Руководство по установке и эксплуатации

Результаты поиска

Содержание 75-050T M1

Отзывы:

Похожие инструкции для 75-050T M1

Бренды по названию

Популярные бренды