General Dynamics CG-1220, Руководство по эксплуатации и обслуживанию

Страница: 74 / 134

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
13
5.0 MONITOR AND CONTROL COMMANDS
ACKNOWLEDGE-FAULTS
Path:
/ ACKNOWLEDGE-FAULTS
Type:
Executable
Syntax:
ACKNOWLEDGE-FAULTS
Notes:
ACKNOWLEDGE FAULTS clears current alarm conditions. The fault message
remains displayed on the screen, but no longer causes an alarm and the summary
fault contact closure is no longer asserted by this fault.
ADDRESS OFFSET (v 1.19.06 or later)
Path:
/ CONFIGS COMM-PARAM PORT-3 ADDRESS-OFFSET
Type:
Data Editor
Syntax:
ADDRESS-OFFSET [= n] | [D]
Range:
Integer: 0 .. 224
Notes:
ADDRESS-OFFSET is the offset added to the multi-drop bus address of a device to
determine the ASCII value needed to be used on the bus.
Example:
ADDRESS-OFFSET is 48 (ASCII for '0')
MASTER-ADDRESS is 0
SLAVE-ADDRESS is 1
In the above example the ASCII value on the RS-485 multi-drop bus would be 48
(ASCII for '0') for the master, and 49 (ASCII for '1') for the slave.
ANALOG OUTPUTS
Path:
/ CONFIGS OPERATION ANALOG-OUTPUTS
Type:
Sub Menu
Syntax:
ANALOG-OUTPUTS
Notes:
The ANALOG OUTPUTS menu controls the Digital to Analog Converter (DAC) DC
Voltage output Range, Minimum Reference Power Level, Slope, Update Rate, and
Attenuation to generate the tracking voltage.