INTRODUCTION
FUNCTION OF
THE TMS/
SUPERVISORY
CONTROLLER
NOTE
In the TMS-3000 and TMS Compact, the Controller is
referred to as the TMS-3000 Controller, TMS Controller or
Controller. In the Univ. MM+ V4 TDM and MINIMUX
TDM, the Controller is referred to as the Supervisory Con-
troller.
In this manual, the abbreviation TMS/Supervisory Controller will be
used.
The TMS/Supervisory Controller performs the following functions:
•
Recognize the type of voice card
•
Configure the voice card
•
Program the voice card hardware according to line speed, etc.
•
Monitor and report status and alarms, and
•
Support diagnostic procedures involving the voice card.
TECHNICAL
MANUALS
To assist in installation of the CELP Voice Channel Module, it is rec-
ommended that the following manuals be available:
If installing in a TMS-3000:
•
Operating and Installation Instructions Manual for TMS-3000, GDC
Publication No. 036R303-000 and TMS-3000 User's Guide for Software
Version GTS 2.0 (or later), GDC Publication No. 036R603.
Installing in a TMS Compact:
•
Instruction Manual for TMS Compact, GDC Publication No. 036R320-
000 and TMS-3000 User's Guide for Software Version GTS 2.0 (or
later), GDC Publication No. 036R603.
Installing in a Univ. MM+ V4 TDM:
•
Instruction Manual for the MEGAMUX PLUS TDM, GDC Publication
No. 036R360-000 and the Operator's Instructions for the MEGAMUX
PLUS TDM, GDC Publication No. 036R660-000.
Installing in a MINIMUX TDM:
•
Instruction Manual for the MINIMUX TDM, GDC Publication No.
036R333-000.
1-2
