Generac Power Systems QT05030AVAN Скачать руководство пользователя страница 19

 

 Storage batteries give off explosive hydrogen 

gas. This gas can form an explosive mixture 

around the battery for several hours after 

charging. The slightest spark can ignite the 

gas and cause an explosion. Such an explo-

sion can shatter the battery and cause blind-

ness or other injury. Any area that houses a 

storage battery must be properly ventilated. 

Do not allow smoking, open flame, sparks or 

any spark producing tools or equipment near 

the battery.

n

 

 Battery electrolyte fluid is an extremely 

caustic sulfuric acid solution that can cause 

severe burns. Do not permit fluid to contact 

eyes, skin, clothing, painted surfaces, etc. 

Wear protective goggles, protective clothing 

and gloves when handling a battery. If the 

fluid is spilled, flush the affected area imme-

diately with clear water.

n

 

 Do not use any jumper cables or booster 

battery to crank and start the generator 

engine. If the battery has completely dis-

charged, remove it from the generator for 

recharging. 

n

 

 Be sure the AUTO/OFF/MANUAL switch is set 

to the OFF position before connecting the 

battery cables. If the switch is set to AUTO 

or MANUAL, the generator can crank and 

start as soon as the battery cables are con-

nected.

 

 Be sure the 120VAC power supply to the bat-

tery is turned OFF, or sparking may occur at 

the battery posts as the cables are attached 

and cause an explosion.

BATTERY REPLACEMENT

When replacing batteries, use the same number and the type of 

battery that follows:

BCI Group No.

CCA

24F-6

525 @ 0 deg. F

NOTE:

The BCI number should be located directly on the battery.

REPAIR PARTS

The latter portion of this manual consists of exploded views, 

parts lists and electrical data pertaining to this generator set. The 

parts lists consist of (a) an item number, (b) a part number, (c) 

the quantity required, and (d) a description of the part. The item 

number corresponds to an identical number on the exploded view 

drawing.

Periodic Replacement Parts

Part Name

Part Number

Oil Filter

# 0E7415

Radiator Cap

# 046627

Air Cleaner

# 0A4637

Spark Plug

Champion # RC12LC4

10-4

Maint001  Rev

. A  07/10

Maintenance

Содержание QT05030AVAN

































































Отзывы: