Generac Power Systems G22, Руководство оператора

Страница: 9 / 32

CONTACT US AT
1-888-545-6576
9
Installing the Standard Table and Frame Stand
Parts Supplied: (List below and Figure 2)
Item # Part # Description Qty
1 ............. 36463 .............. Tray, Kinetic, Medium ...................................... 1
2 ............. 36465 .............. Cradle, Extension, Left ..................................... 1
3 ............. 36466 .............. Cradle, Extension, Right ................................... 1
4 ............. 36464 .............. Bracket, Support, PP, Kinetic ........................... 2
5 ............. 36467 .............. Mount, Cradle, Extension ................................ 2
6 ............. 32104 .............. Bolt, Carriage, 3/8-16 X 1", Gr5, ZP ................. 18
7 ............. 33333 .............. Nut, Nylon Lock, Flanged, 3/8-16 .................... 18
Compare the contents of the Shipping Box with the “Parts Supplied” list above.
If you have any questions please contact us at 1-888-545-6576 for assistance.
Tools needed:

Ratchet and Extension with a 9/16" Socket.
1. Support the Beam of the Log Splitter with a Jack Stand or equivalent ( Figure
3 ).
Note: Use the lower four holes at the end of the Beam to mount the Brackets in the
next step.
2. Install the Frame Stand and Support Brackets with four 3/8-16 X 1 Carriage
Bolts and 3/8-16 Flanged Locknuts by hand but do not tighten.
3. Install the Cradle Extension Mounts using four 3/8-16 X 1.25" Flange Bolts
and 3/8-16 Flanged Locknuts by hand but do not tighten (
Figure 4 ).
4. Position the Tray onto the Support Brackets and secure the front of the Tray
to the Brackets with four 3/8-16 X 1.25" Flange Bolts and 3/8-16 Flanged
Locknuts by hand but do not tighten (
Figure 5 ).
5
Figure 2
Hardware
Bag
2
3
1
4
6
7
Support
Brackets
Figure 3
Frame
Stand
Cradle Extension
Mounts
Figure 4
Tray
Figure 5
Bolt through Tray
and Brackets