Generac Portable Products 1330-0, Руководство пользователя

Страница: 10 / 24

10
Generac Portable Products 2000PSI High Pressure Washer
• Position the choke rod (Figure 10).
• Cold engine ~ ~ ~ ~ ~ ~ ~ ~ ~(Choke-CLOSED)
• Restarted warm engine ~ ~ ~ ~(Choke-OPEN)
• Just refueled engine ~ ~ ~ ~(Choke-CLOSED)
• Move throttle lever to the “Fast” position
(Figure 11).
IMPORTANT: When using the pressure washer,
always keep the throttle in the fast position.
• Grasp the starter grip handle and pull slowly until
you feel some resistance. Then pull rapidly to start
the engine (Figure 12).
• Return the starter grip handle slowly.
• Grasp starter grip and pull slowly until you feel
some resistance. Then pull cord out with rapid full
arm stroke. Let rope return slowly. Do not let rope
“snap back” against starter.
• If the choke lever has been moved to the
“CLOSED” position to start the engine, gradually
move it to the “OPEN” position as the engine
warms up.
How to Stop Your Pressure Washer
• Move the throttle Lever to the “Stop” position.
• Squeeze trigger on the spray gun to relieve
pressure in the hose.
Note : A small amount of water will squirt out from the
spray gun when you release the pressure.
Figure 12 — Starter Grip
Figure 11 — Throttle Lever
Figure 10 — Choke Rod