P-780 User’s Guide v1.2
February 7, 2005
Gemtek Systems
Page 30 of 60
By default, DHCP server is disabled for P-780.
IP Address from / IP Address to
– specify the IP address range to be dynamically allocated by the
DHCP server.
Netmask
– enter the netmask for IP pool range.
Gateway
– enter the gateway IP for wireless clients.
WINS Address
(Windows Internet Naming Service) – specify server IP address if it is available on the
network [dots and digits].
Lease Time
– specify the IP address lease interval in seconds [1-1000000].
DNS address
– specify the DNS server’s IP address [in digits and dots notation].
DNS secondary address
– specify the secondary DNS server’s IP address [in digits and dots
notation].
Change status or leave in the default state if no editing is necessary and click the
Save
button.
Figure 24 –Apply or Discard DHCP server Settings
The DHCP server settings will be automatically adjusted to match the network
interface settings.
The Gateway of DHCP server settings must be same with the Gateway of P-780
For each change of settings, the P-780 needs to be restarted to apply all settings changes when
clicking
Apply
Changes
. Request for reboot server appears:
