Gems LDS4 Скачать руководство пользователя страница 54

Страница: 54 / 71

LDS4 Colour Display System

LDS4 Colour Display System

In the Action tab, the effects of each button, stopwatch trigger or alarm are defined. Using the
drop down box above the actions box, it is possible to select whether a button will cause an effect
on every screen or a particular screen. By double clicking on the Unused box in the Effects area,
an effect can be added to a particular action. Double clicking on an item in the Used column
removes the effect from this action.

When more than one event is triggered for a given action, the actions are effected in priority
order of topmost first. Each action is moved higher or lower in the priority list by selecting it and
pressing the up or down button in the order group box. The following effects are available:

Calib Factor : decrease - Decreases the calibration factor by 0.001.

Calib Factor : increase - Increases the calibration factor by 0.001.

CDTripRaw : decrease - Decreases the reset value for countdown trip by 0.025.

CDTripRaw : increase - Increases the reset value for countdown trip by 0.025.

CDTripRaw : reset - Resets the countdown trip to the reset value.

FuelInterval : reset - Resets the fuel interval meter to zero.

FuelIntvlLap : start - Re synchronises this output with the fuel interval.

FuelIntvlLap : stop - Freezes the current value of the fuel interval in this output.

FuelTotal : reset - Resets the total fuel.

FuelTotalLap : start - Re synchronises this output with the fuel total.

FuelTotalLap : stop - Freezes the current value of total fuel in this output.

IntTripRaw : decrease - Decreases the reset value for the interval trip meter by the Interval
Trip Resolution specified in the co-driver setup.

IntTripRaw : increase - Increases the reset value for the interval trip meter by the Interval
Trip Resolution specified in the co-driver setup.

IntTripRaw : Reset - Resets the interval trip meter to the reset value.

Open Screen <n> - Changes from the current page to page <n>.

RawFzCDTrip : start - Unfreezes Countdown Lap.

RawFzCDTrip : stop - Freezes Countdown Lap.

RawFzIntTrip : start - Unfreezes Interval Trip.

RawFzIntTrip : stop - Freezes Interval Trip.

RawFzTotalTrip : start - Unfreezes Total Trip.

RawFzTotalTrip : stop - Freezes Total Trip.

Revert to switch screen - Go to the screen currently specified by the page select switch.
Normally used after an Open Screen effect.

Stopwatch : lap - Freezes the displayed stopwatch time (stopwatch continues and is re-
displayed by effecting a Stopwatch : start).

Stopwatch : reset - Resets the stopwatch to zero.

Stopwatch : start - Starts the stopwatch. If the stopwatch is currently in lap mode, the lap
value is re synchronised with the stopwatch.

Stopwatch : Stop until reset - Stops the stopwatch. A start event will not restart the
stopwatch until a reset event has been received.

StopwatchLap : lap - Freezes the current value of the stopwatch in this output.

StopwatchLap : start - Re synchronises this output with the stopwatch value.

Text Hide Urgent Panel - Hides an urgent mode

text message panel

if shown.

Text Message Delete - Deletes all

text messages

Text Message Down - Scrolls down the list of received

text messages

Text Message Up - Scrolls up the list of received

text messages

Time : decrease - Decreases the current time by one minute.

Time : increase - Increases the current time by one minute.

Time : reset - Sets the seconds of the real time clock to zero.

TimeLap : start -

TimeLap : stop - Freezes the current value of time in this output.

TotalTripRaw : decrease - Decreases the total trip meter by the Total Trip Resolution
specified in the co-driver setup.

TotalTripRaw : increase - Increases the total trip meter by the Total Trip Resoultion
specified in the co-driver setup.

Содержание LDS4








































































Результаты поиска

Содержание LDS4

Отзывы:

Gems LDS4, Руководство по эксплуатации, Страница: 54 / 71

Результаты поиска

Содержание LDS4

Отзывы: