manualshive.com logo in svg

Gems LDS4, Руководство по эксплуатации, Страница: 12 / 71

Поделиться
Скачать
Gems LDS4 Скачать руководство пользователя страница 12

6

LDS4 Colour Display System

© 2009 General Engine Management Systems Ltd.

LDS4 Colour Display System

windows Vista and 7.

·

If an attempt is made to add a bitmap that exceeds the screen resolution, the bitmap is rejected
and an appropriate message show,

·

Added support for Fastest Lap Delta and Split Lap Delta.

v3.40 - 18/02/10

·

Added road mode support to 

LDS3 setup

 - this enables the outer pair of shift lights to be used

to show indicator and high beam status. 

Note: Turning this option with LDS4 version 06v00

or earlier will result in unpredictable behaviour

.

·

Added support for day increase and day decrease events for setting day/ month/ year.

·

Added support for transmitting serial number and version number over CAN. This is done by
selecting SERIAL NUMBER or VERSION in the size column of the 

CAN Transmit

 setup. Note

that it is also necessary to specify a dummy input (such as an analogue input) to trigger the
transmitting of the data.

·

Fixed bug in CAN Outputs dialog which could generate an access violation when trying to
delete more outputs than exist.

·

Fixed some minor bugs in the monitor screen editor.

·

Prevented CAN status and Analogue raw outputs from being deleted.

·

Updated text in 

brightness

 dialog box to describe fine grain brightness options.

·

Removed reference to CAN 2 in CAN outputs and external source editor.

·

Added ability to set the display time and date from the config menu.

·

Added support for Little Endian 

CAN inputs

. Requires 06x02 firmware or later.

v3.39 - 10/12/09

·

Fixed bug which could cause spurious split lap times to be added to the setup.

·

Added support for 50Hz and 20Hz CAN transmit rates.

·

Improved checking of warning message outputs.

·

Added support for user configurable 

fast analogue can Tx

.

·

Added support for 

CAN status

 flag messages.

·

Added alarm mode for 

value gauge

.

·

Added day, month, year 

formatting

 for time outputs.

v3.38 - 13/08/09

·

Fixed bug that could cause newly created screens to have some strange colour choices for
colour defaults.

·

Added support for 8 more screens.

·

Fixed bug where analogue inputs were not automatically added when creating a new setup.

·

Fixed bug in GPS/OSA editor that could cause problems when adding/ deleting splits.

·

Laptime outputs are now added correctly.

·

Fixed bug where Speed 1 and Speed 2 did not get automatically added when creating a new
setup.

·

A0 Raw added to setups. This is the same input as the page select but if the user is using CAN
page select, then A0 is available for use as a standard analogue input. Note: A0 is fitted
internally with a 10k pullup. Note also that the ScreenSelSSR function table will need to be
setup to output zero all the time to effectively disable the analogue page select.

v3.37 - 07/08/09

·

Added STOP_UNTIL_RESET event to stopwatch. Once received, the stopwatch will not start
running again unless a reset is received first. This works around setups that use a distance (eg
total trip) to start the stopwatch as this can be non-zero when the display is switched on which
results in an unwanted START event.

·

Fixed: Crosshair button on toolbar does not deselect when another button clicked.

Содержание LDS4








































































Отзывы:

Нет отзывов