manualshive.com logo in svg

Gems LDS4, Руководство по эксплуатации, Страница: 38 / 71

Поделиться
Скачать
Gems LDS4 Скачать руководство пользователя страница 38

32

LDS4 Colour Display System

© 2009 General Engine Management Systems Ltd.

LDS4 Colour Display System

This bar tacho gauge has the following special properties:

·

Enable Lower Tacho Limit - Turns on the lower tacho limit. When enabled, the first part
of the tacho (up to Limit End) is drawn in Limit Colour as it is filled. If Enable Flash
Below Limit is checked, the lower part of the tacho will flash if the input value is below
Limit End.

·

Enable Upper Tacho Limit - Turns on the upper tacho limit. When enabled, the last part
of the tacho (after to Limit Start) is drawn in Limit Colour as it is filled. If Enable Flash
Above Limit is checked, the upper part of the tacho will flash if the input value is above
Limit Start.

·

Flash Entire Tacho When Flash Mode Active - If the upper limit is flashing because
Enable Flash Above Limit is checked, all the filled tacho blocks will flash if this option is
checked.

It can be seen that with these options, the tacho can effectively be divided into three separate
different coloured regions.

6.5

Text Label Gauge

The Text Label gauge is a static gauge (it has no input) that is used to label other gauges and
provide static information to the user. The text displayed in the gauge is set in the Text property.
The Direction property is used to specify the direction in which the text is drawn in. Right
specifies left to right. Down specifies top to bottom.

6.6

Variable String Gauge

The variable string gauge is used to display text from a string output such as a bit string output.
The Justification property specifies whether the text is aligned to the left, right or centre of the
bounding rectangle.

Note: It is important to select the background colour of the value gauge to be the same as
the colour of the background the gauge is over. Failure to do so will result in corruption of
the value displayed.

6.7

Text Message Gauge

The text message gauge is used to display messages received from a GEMS radio messaging
system or GEMS SMS1 text messaging system. This gauge has the following special properties:

·

Show Urgent Messages Only - In this mode, the gauge is normally hidden but will display
over all other gauges when an urgent message is received. The gauge will be hidden again

Содержание LDS4








































































Отзывы:

Нет отзывов