background image

m d j -

1 0 0 0 V 2

  m a n u a l  

  g e m i n i s o u n d . c o m

9

Pressing PLAY/PAUSE (2) will begin playback of the selected 
track. Pressing PLAY/PAUSE (2) again will pause playback and 
hold the track at the current position.

S E T T I N G   A   M A S T E R   C U E   P O I N T

While the unit is in playback, press PLAY/PAUSE (2) to pause the 
track. While the track is paused, press CUE (3) to set the cue 
point at the current position.  

ADJUSTING THE MASTER CUE POINT

After the cue point has been programmed, press PLAY/PAUSE 
(2) to pause the track at the play marker.  Press SEARCH (4) or 
rotate the jogwheel to adjust the cue position. Press CUE (3) to 
set the cue point at the play marker.

RETURNING TO THE MASTER CUE POINT

While the unit is playing and after the cue point has been 
programmed, pressing CUE (3) will cause the unit to enter the 
PAUSE mode at the programmed cue point.  Holding down the 
CUE button changes the function to preview, and allows you to 
stutter start or play from the programmed CUE POINT. Releasing 
the CUE button will return the track to the preset CUE point.  
You can press the PLAY/PAUSE button while holding the CUE 
button to allow playback to continue from the current position.

The AUTO CUE (24) function sets the Master Cue at the point
immediately before sound starts, skipping the beginning silent 
section of tracks. Press shift and keylock (24) to enable auto cue.  
The audio level threshold determines where the auto cue is set, 
and can be adjusted in Settings>Autocue Level.

Pressing SEARCH FORWARD (4) will fast-search through the 
track in the forward direction, and holding SEARCH BACK (4) 
will fast-search through the track in the reverse direction.

Pressing TRACK SEARCH FORWARD (5) will advance to the 
beginning position of the next track. Pressing TRACK SEARCH 
BACK (5) will return the current track to the beginning position.

A D J U S T I N G   T E M P O

The tempo increases when the pitch slider [26] is moved 
towards the user (down), and decreases when moved away 
from the user (up). The rate at with the playing speed is 
changed is indicated on the LCD display.

P I T C H   B E N D

Pressing the PITCH BEND - / + (25) will temporarily raise or lower 
the pitch from the existing pitch setting. Releasing the buttons 
will return the pitch to the original setting.

P I T C H   R A N G E

Pressing shift and pitch bend - (25) toggles the range between 
+/- 4%, 8%, 16%, 24% ,50% and 100%. Please note that the 50% 
and 100% pitch ranges are not available when MDJ units are in 
LINK mode.  

KEY LOCK (24) allows the user to adjust the tempo (speed) of the 
song without causing a noticeable change in pitch.

Pressing shift and pitch bend + (25) button allows the user to 
toggle through the different BPM modes: 

ID3 / AUTO / MANUAL 

/ TAP.

BPM TAP -

 

When BPM mode is set to TAP, the BPM TAP

(23) button can be used to set the BPM of the loaded track. BPM 
is calculated through a rolling average, with each tap increasing 
the accuracy.  To re-start the calculation, don’t touch the BPM 
TAP button for 2 seconds.

MANUAL BPM - 

When BPM mode is set to MANUAL, the browse 

knob (14) can be used to set the beats per minute of playback by 
pressing and rotating to the desired tempo.  Hold shift and turn 
the browse knob for fine control.

ID3 -

 

when BPM mode is set to ID3, the BPM information from 

the ID3 tag will be displayed.

AUTO BPM -

 

When BPM mode is set to AUTO BPM, the beats 

per minute are calculated automatically and corresponding info 
is displayed on screen.

NOTE:  If a BPM value is present in file info ID3 tag, 
the value is loaded into the unit and displayed.

The BPM LOCK feature allows the user to lock the BPM of all 
songs to a specific value.  To use, enable the feature by pressing 
shift and BPM Tap buttons. By default, the BPM value will change 
to the BPM of the current song.  To change this value, turn the 
browse knob to the desired value and press the browse knob to 
set.  All songs played from your MDJ-1000V2 will now be at the 
selected tempo.

To turn off, press shift and BPM TAP again.

p l ay b a c k   c o n t r o l s

PLAY/PAUSE

AUTO CUE

SEARCH

TRACK SEARCH

TEMPO AND PITCH

MASTER CUE CONTROLS

KEY LOCK

BPM CONTROLS

BPM LOCK

Содержание MDJ-1000V2

















Отзывы: