INTRODUCTION:
Congratulations on purchasing a
Gemini ICDJ CD play-
er
. This state of the art professional CD player is backed
by a three year warranty, excluding lasers. One year war-
ranty on CD lasers. Prior to use, we suggest that you
carefully read all the instructions.
FEATURES:
-Anti-shock using buffer memory (10-40 seconds)
-Digital output
-Slot-in mechanism with red LED "Slot-in" display
-Direct access rubber keypad, fully programmable
-Single auto cue / continuous play
-Seamless looping with reloop
-Pitch bend
-Frame accurate search
-Large red LCD display
-Large soft touch rubber jog wheel
-4%, 8% & 16% variable pitch with OFF feature
-Time select
CAUTIONS:
1. Do not use this CD player at temperatures below
41°F/5°C
or higher than
95°F/35°C
.
2.The apparatus should not be exposed to dripping or
splashing, and no objects filled with liquids such as vases
should be placed on the apparatus.
3. Place the unit in a clean and dry location.
4. Do not place the unit in an unstable location.
5. When disconnecting the power cord from an AC outlet,
always grasp it by the plug. Never pull the power cord.
6. To prevent electric shock, do not remove the cover or the
bottom screws.
THERE ARE NO USER SERVICEABLE
PARTS INSIDE
. Please refer servicing to a qualified tech-
nician.
7. Do not use chemical solvents to clean the unit.
8. Keep the laser pickup clean by keeping the tray closed.
9. Keep this manual in a safe place for future reference.
SAFETY CERTIFICATIONS:
Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5mW
LINE VOLTAGE SELECTION:
Model ICDJ is a dual voltage unit. It will operate at
115
or
230
volts. To set the proper voltage follow these steps:
1. Place the head of a screw driver in the center of the
VOLTAGE SELECTOR SLIDE
(1) found on the rear
panel.
2. Slide the switch left for
115 V
or push the switch right for
230 V
.
3. Do not force or twist the switch. Excessive force may
cause damage. If the switch does not move smoothly,
contact a qualified technician.
CONNECTIONS:
1. Plug one end of a set of
RCA
connectors into each of the
LINE OUTPUT
(2) jacks.
2. Plug the other end of the
RCA
connectors into any avail-
able line level input jacks on your mixer. If you are play-
ing the
ICDJ
through a receiver, you can plug the
RCA
connectors into the
CD
or
AUX
input jacks on your receiv-
er. If there are no
CD
or
AUX
inputs, use any line level
(not phono) inputs.
3. Connect any type of device that will accept a digital sig-
nal, such as
DAT
,
MD
,
HARD DRIVE
,
etc
. to the
COAX-
IAL
(3) inputs on the rear panel to record a digital signal.
4.Connect the power plug into the
POWER JACK
(4) for
power.
FUNCTION DESCRIPTIONS:
POWER SWITCH:
After making sure that the
VOLTAGE
SELECTOR SLIDE
(1), found on the rear panel, is prop-
erly set, plug the unit in and press the
POWER
(5) switch.
The unit will turn on. Pressing the
POWER
(5) switch a
second time will turn the unit off.
DISC IN SLOT:
The
DISC IN SLOT
(6) is where the CD is
held. When a disc is in the slot the red
LED
bar will be
illuminated.
STOP/EJECT:
Press
STOP/EJECT
(7) once to stop,
twice to eject, and hold down to eject the CD.
CUE:
With the unit in the play mode, and after memorizing
the cue point, pressing the
CUE
(8) button will cause the
CD player to enter the pause mode at the memorized cue
point. Holding down the cue button changes the cue func-
tion to preview (allowing you to hear the music play from
the cue point) and releasing the cue button returns you to
the preset cue point.
PLAY/PAUSE:
Each press of the
PLAY/PAUSE
(9) but-
ton causes the operation to change from play to pause or
from pause back to play. See the
CUE INSTRUCTIONS
section for more information.
DISPLAY:
The
DISPLAY
(10) shows the track numbers,
play mode, pause mode, and 3 different time displays.
These time displays are time elapsed on the track, time
remaining on the disc and time remaining on the track.
PLAYBACK DISPLAY:
The
PLAYBACK DISPLAY
(11)
displays the time remaining to play and flashes slowly
when the track has
30
seconds left. The PLAYBACK DIS-
PLAY (11) flashes quickly when the track has
15
seconds
left.
TRACK SKIP:
The
TRACK SKIP
(12) buttons let you
select the track to play.
SEARCH:
The
SEARCH
(13) buttons are used to
move foward or reverse while in play mode. The
SEARCH
(13) buttons are also used to accurately posi-
tion the disc at the point where you wish the track to start
playing. This position on the track is memorized as the
cue point. See the
CUE INSTRUCTIONS
section for
more information.
SINGLE:
Pressing the
SINGLE
(14) button activates the
AUTO-CUE
function. The
AUTO-CUE
function causes
the unit to pause at the beginning of music of the follow-
ing track and allows you to start play immediately from the
start of music without any blank space (which exists at the
beginning of every track). Pressing the
SINGLE
(14) but-
ton a second time activates the
CONTINUOUS
function
causing the unit to play continuously (after the last track,
the unit will return to the first track of the disc and contin-
ue to play). Pressing the
SINGLE
(14) button a third time
deactivates the
CONTINUOUS
function.
TIME:
The
TIME
(15) button switches the time display
between the three available choices listed under display.
LOOP IN:
Pressing the
LOOP IN
(16) button while a track
is playing will set a loop point.
(4
4)
Содержание iCDJ
Страница 3: ...iCDJ 3 ...
Страница 15: ...NOTES 15 ...
