Gemini CD-400X Скачать руководство пользователя страница 4

Страница: 4 / 12

(4)

PITCH

Pushing the

PITCH (21)

button activates the

PITCH CONTROL

(23)

. The pitch of the

will change according to the position of the

PITCH CONTROL (23)

PITCH BEND

Pushing the

PITCH BEND (22)

buttons will automati-

cally raise the pitch up to

+4%

or lower the pitch down to

-4%

from the

existing pitch setting. Releasing the buttons will return the pitch to the
original pitch setting. You can use this function to match the beat when
mixing from one track to another.

DIGITAL OUTPUT JACK

Connecting any type of

DAT, MD, HARD

DRIVE

, or other such items which accept digital signals to the

BNC (1)

output connector on the rear panel of the transports allows you to
record a digital signal from

MASTER TEMPO

: MASTER TEMPO

(25)

This control locks in the

music’s pitch even when the tempo changes. You can vary the beat
with no change in vocal or instrument tone.

EFFECTS BUTTONS

The

ZOOM (26)

effect changes the delay time by

rotating the

JOG WHEEL (16)

, mixing a short delay with the playback sound.

This function allows you to produce the sound of a

jet engine

(flanger

effect)

using a single

player. The

ECHO

button

(27)

adds echo to the

music. The delay time can be adjusted by turning the

JOG WHEEL (16)

to the left or right. The

FILTER

button

(28)

allows you to change the

cutoff frequency of the playback sound when the

JOG WHEEL (16)

rotated. This allows the

to extract and play back specific parts

from the playback sound. The

BRAKE

button

(29)

allows adjustment in

the speed at which the

slows down until it stops.

OPERATING INSTRUCTIONS

1. Make sure that the

VOLTAGE SELECTOR (4)

switch,

found on the rear

panel, is set for the proper voltage. Plug the unit in and press the

POWER (3)

switch.

2. Press the

OPEN (24)

button, place a

in the

DISC TRAY (17)

and

close the tray door.

3. Push the

TRACK SKIP (8)

buttons to select the track you want to play.

4. Press the

PLAY/PAUSE (11)

button and the unit will instantly play.

CUE INSTRUCTIONS

1. To memorize the spot at which you want play to start, the

cue point

select the proper track, and then push the

PLAY/PAUSE (11)

button so

the unit goes into

play mode

(the

play/pause

LED

will glow). Listen to

the

and when the

gets to the approximate spot, push the

PLAY/

PAUSE (11)

button so the unit goes into

pause mode

(the

PLAY/PAUSE

LED

will blink). Move the

JOG WHEEL (16)

or use the

SEARCH (9)

buttons to find the precise spot you want play to begin, and push the

PLAY/PAUSE (11)

to memorize the

cue point

. Press

CUE (10)

to return

to the memorized

cue point

pause mode

, and then push

PLAY/

PAUSE (11)

to play from the

cue point

. Or you can press the

BOP/

RELOOP (7)

button to return to and instantly play from the saved

cue

point

(if you do not have a loop saved).

To use

FLY CUE (5)

to set a

cue point

, follow these instructions:

1. With the unit in the

play mode

(play/pause

LED

glows green), press

FLY CUE (5)

at the point where you want the cue point to be (the unit

will continue to play). The

cue point

is now memorized. Press the

CUE

(10)

button to return to the memorized

cue point

. Push the

PLAY/

PAUSE (11)

button, and the unit will instantly play from the spot

selected.

AND/OR

To use the

SET CUE (15)

button and the

DIRECT ACCESS (12)

buttons

to set a

cue point

, follow these instructions:

1. Press the

SET CUE (15)

button (the set cue

LED

will light). Use the

DIRECT ACCESS (12)

buttons to memorize the spot at which you want

play to start, the

cue point

, by selecting the proper

track

minute

second

and

frame

. Push the

CUE (10)

button to set the

CUE

You can

do this in any mode, including

play mode

, so that you may cue a track

while playing a track. Press the

CUE (10)

button again to return to the

memorized

cue point

pause mode

, and then push

PLAY/PAUSE (11)

to play from the

cue point

. Or you can press the

BOP/RELOOP (7)

button to return to and instantly play from the saved

cue point

(if you

do not have a loop saved).

SPECIFICATIONS:

GENERAL:

Disc Type.........................................Standard Compact discs 12 cm & 8 cm)

Time Display............................Track Elapsed, Track Remain, or Total remain

Variable Pitch.........................................+/- 10% Slider with Resume Switch

Start..............................................................................Within 0.15 seconds

Track Selection.........................................1 to 99 Tracks

AUDIO SECTION:

Quantization...........................................1 Bit Linear/Channel, 3 Beam Laser

Oversampling Rate.............................................................................8 Times
Sampling Frequency.........................................................................44.1 kHz

Frequency Response............................................................20 Hz to 20 kHz

Total Harmonic Distortion..................................................Less Than 0.005%

Signal to Noise Ratio............................................................................>96 dB

Dynamic Range...................................................................................>94 dB

Output Level (nominal)..........................................................1.9 Volts R.M.S.

Power Supply..............................................................AC 115/230V,60/50Hz

Dimensions.................................9.75” x 8.5” x 3.25” (274 x 216 x 82.5 mm)

Weight.......................................................................................5 lbs. (2.3 kg)

* Specifications and design are subject to change without notice

for purpose of improvement

SUGGESTION: To avoid confusion while setting cue points, keep the time

display in ELAPSED TIME mode. When you use the DIRECT ACCESS
BUTTONS to set a cue, the track, minute, second and frame are always in
elapsed time. If the unit’s time display is in TRACK REMAIN or TOTAL
REMAIN mode, the track, minute, second and frame displayed will be the
remain time and not the track, minute, second and frame you entered.

2. To fine tune a

cue point

, pause play at the memorized

cue point

(the

cue

LED

will glow and the

PLAY/PAUSE LED

will blink), then use the

JOG WHEEL (16)

SEARCH (9)

buttons to scan frame by frame (

75th

of a second) to where you want play to begin (the

CUE LED

will

blink while you scan). Press the

PLAY/PAUSE (11)

button to save the

new

cue point

Note: During fine tuning there will be a stutter effect (to help you find the

beat). The stuttering effect will end when you press the PLAY/PAUSE (11)
button to save the cue point. Also, during fine tuning if you hold down the
SEARCH (9) buttons, the unit will scan quickly after 10 frames.

TROUBLE SHOOTING

•

If the disk will not play,

check to see if the disc was loaded correctly

(label side up). Also check the disc for excessive dirt, scratches, etc.

•

If the disc turns but there is no sound, check the cable connections. If
they are okay, check your amplifier or receiver.

•

If the

skips, check the

for dirt or scratches. Do not assume that

the