Gemini CD-400X Скачать руководство пользователя страница 3

Страница: 3 / 12

(3)

INTRODUCTION:

Congratulations on purchasing a

Gemini CD-400X

player. This

state of the art professional

player is backed by a three year

warranty, excluding lasers...one year warranty on

lasers. Prior to

use, we suggest that you carefully read all the instructions.

CAUTIONS:

1. Do not use this

player at temperatures below

41°F/5°C

or higher

than

95°F/35°C

2. The apparatus should not be exposed to dripping or splashing, and no

objects filled with liquids such as vases should be placed on the
apparatus.

3. Place the unit in a clean and dry location.

4. Do not place the unit in an unstable location.

5. When disconnecting the power cord from an

outlet, always grasp

it by the plug. Never pull the power cord.

6. To prevent electric shock, do not remove the cover or the bottom

screws. There are no user serviceable parts inside. Please refer
servicing to a qualified technician.

7. Do not use chemical solvents to clean the unit.

8. Keep the laser pickup clean by keeping the tray closed.

9. Keep this manual in a safe place for future reference.

SAFETY CERTIFICATIONS:

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5mW

LINE VOLTAGE SELECTION:

Model

CD-400X

is a dual voltage unit. It will operate at

115

230 volts

To set the proper voltage follow these steps:

1. Place the head of a screw driver in the center of the

VOLTAGE

SELECTOR (4)

switch found on the rear panel.

2. Slide the switch left for

115 volts

or slide the switch right for

230 volts.

3. Do not force or twist the switch. Excessive force may cause damage.

If the switch does not move smoothly, contact a qualified technician.

CONNECTIONS:

1. Plug one end of a set of

RCA

connectors into each of the

LINE

OUTPUT (2)

jacks.

2. Plug the other end of the

RCA

connectors into any available line level

input jacks on your mixer. If you are playing the

CD-400X

through a

receiver, you can plug the

RCA

connectors into the

AUX

input

jacks on your receiver. If there are no

AUX

inputs, use any line

level (not phono) inputs.

FUNCTION DESCRIPTIONS:

ANTI-SHOCK BUFFER MEMORY

With

6 SECONDS OF ANTI-SHOCK

BUFFER MEMORY

, the

player stores

seconds of future play to

ensure that any harsh movement or bumping of the unit will not
interrupt play and play will continue smoothly.

POWER SWITCH

After making sure that the

VOLTAGE SELECTOR (4),

switch found on the rear panel, is properly set, plug the unit in and
press the

POWER (3)

switch. The unit will turn on.

DISC TRAY

The

DISC TRAY (17)

is where the

is held. Pressing the

disc tray

OPEN (24)

button will open the tray.

OPEN

Press the

OPEN (24)

button to open the

DISC TRAY (17)

DISPLAY

The

DISPLAY (13)

shows the

TRACK NUMBER

PITCH

VALUE

SINGLE-AUTO CUE

CONTINUE

(for continuous play), and 3

different

TIME DISPLAYS

. These TIME DISPLAYS are

TIME ELAPSED

(

ELAPSED

) on the track,

TIME REMAINING

on the disc (

TOTAL

REMAIN

) and

TIME REMAINING

on the track (

REMAIN

TIME

measured in

MINUTES

SECONDS

and

FRAMES

PLAYBACK DISPLAY

The

PLAYBACK DISPLAY (14)

displays the time

remaining to play and flashes slowly when the track has

seconds

left. The

PLAYBACK DISPLAY (14)

flashes quickly when the track

has

seconds left.

PLAY/PAUSE

Each press of the

PLAY/PAUSE (11)

button causes

the operation to change from play to pause or from pause back to play.
See the

CUE INSTRUCTIONS

section for more information.

TRACK SKIP

The

TRACK SKIP (8)

buttons let you select the

track to play.

SEARCH

The

SEARCH (9)

buttons are used to move forward

or reverse while in

play

pause mode

. See the

CUE INSTRUCTIONS

section for more information.

JOG WHEEL

The

JOG WHEEL (16)

has two functions. Use the

JOG WHEEL

(16)

to make fine adjustments in

pause

mode

. Use the

JOG WHEEL (16)

bend the pitch for precise synchronization in

play

mode

STOP

The

STOP (18)

button will end the playing of the

TIME

The

TIME (20)

button switches the time display between the three

available choices listed under

DISPLAY (13)

CUE

With the unit in

play mode

(the

PLAY/PAUSE LED

will glow), and

after the

cue point

has been set, pressing the

CUE (10)

button will

cause the

player to enter

pause mode

(the

PLAY/PAUSE LED

will

blink) at the memorized

cue point

(the

CUE LED

glows yellow). Holding

down the

CUE (10)

button changes the

CUE (10)

function to

PREVIEW

allowing you to hear the music play from the

cue point

. Releasing the

CUE (10)

button returns you to the preset

cue point

FLY CUE

The

FLY CUE (5)

function lets you set cues on the fly with one

press of a button. With the unit in the

play mode

(the

PLAY/PAUSE (11)

LED

will glow), press

FLY CUE (5)

at the point where you want the

cue point

to be (the unit will continue to play). The

cue point

is now

memorized. See the

CUE INSTRUCTIONS

section for more information.

SET CUE

Use the

SET CUE (15)

button to activate the

DIRECT ACCESS

BUTTONS

to set a

cue point

. See the

CUE INSTRUCTIONS

section for

more information.

DIRECT ACCESS

Use the

DIRECT ACCESS (12)

buttons to select what

track to play and to set a

cue point

. See the

CUE INSTRUCTIONS

section for more information.

SEAMLESS LOOP

After a

cue point

is memorized, pressing the

CUE-B/

EXIT (6)

button in

play mode

repeats the section between the

cue

point

and the

point

where the

CUE-B/EXIT (6)

button was pressed.

Press the

CUE-B/EXIT (6)

button again or pause play to

EXIT

the

repeating play. Set a new

cue point

from outside the loop to clear the

loop from the unit’s memory.

Note: If you use the SET CUE (15) to set a cue point while the unit is playing

and then use it immediately for a loop, there will be a slight delay the first
time you play the loop. Avoid this by playing the cue before setting the
loop or by using the FLY CUE (5) or the CUE (10) to set the cue point you
want to loop from

BOP/RELOOP:

The

BOP/RELOOP (7)

button has two functions. To

return to a previously saved loop from normal play, press the

BOP/

RELOOP (7)

button after saving the loop. To return to and instantly play

from a previously saved

cue point

, press the

BOP/RELOOP (7)

button

after setting the

cue point

(if you do not have a loop saved).

SINGLE-AUTO CUE/CONTINUOUS

Pressing the

SINGLE-AUTO CUE/

CONTINUE (19)

button activates the

AUTO CUE FUNCTION

. The

AUTO

CUE FUNCTION

causes the unit to pause at the beginning of music of the

following track and allows you to start play immediately from the start of
music without any blank space (which exists at the beginning of every
track). Pressing the

SINGLE-AUTO CUE/CONTINUE (19)

button a second

time activates the

CONTINUOUS

function causing the unit to play

continuously (after the last track, the unit will return to the first track of the
disc and continue to play). Pressing the

SINGLE-AUTO CUE/CONTINUE (19)

button a third time deactivates the

CONTINUOUS

function.