1.0
2.0
4.0
5.0
6.0
7.0
8.0
- PRELIMINARY ADVICE.............................................................................................
- DYSTEM OPERATION..............................................................................................
2.1 - Detection Zones......................................................................................................
2.2 - Rear sensors...........................................................................................................
2.3 - Automatic activation of front sensors (odometer signal)..........................................
2.4 - Timer-activated of front sensors (odometer not connected)....................................
.............................................
..........................................................................................
3.2 - Faulty sensors.........................................................................................................
3.3 - Others......................................................................................................................
- WARRANTY CONDITIONS.......................................................................................
- WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE......
- INSTALLATION OF SENSORS..................................................................................
- CONNECTIONS.........................................................................................................
- P
................................................................................................
....................................
..........................................................................................
9.2 - Rear unit..................................................................................................................
USER MANUAL
INSTALLER MANUAL
3.0
9.0
- TROUBLESHOOTING GUIDE......................................
3.1 - Low power supply signal
ROGRAMMING.......
- SETTING OF PARAMETERS................................................
9.1 - Front unit (main unit)......
PAGE 02
USER MANUAL - PAGE 03
UK
CONTENTS
PAGE 02
PAGE 03
PAGE 03
PAGE 03
PAGE 05
PAGE 05
PAGE 05
PAGE 05
PAGE 05
PAGE 05
PAGE 09
PAGE 04
PAGE 04
PAGE 06
PAGE 10
PAGE 11
PAGE 11
PAGE 11
1.0 - PRELIMINARY ADVICE
Dear customer,
Before installing, identify your kit and refer to it for the correct instructions.
The Caution and Warning signs in this manual provide important notices for installing and using this
product.
Be sure to follow them in order to ensure a safe and reliable use:
For the user.
This sign highlights useful information or indications regarding the use of the parking
system.
For the installer.
This
arious operating modes
sign indicates v
according to connections and
programming of the system or it simply provides useful indications for the installation.
!
3.0 - SYSTEM OPERATION
USER MANUAL
2.1 - DETECTION ZONES
Detection zones are indicated as “F” (front) and “R” (rear).
Detection zones closest to the obstacle are indicated as “FC” (front) and “RC” (rear)
and displayed as “STOP”.
The STOP zone is the minimum distance detected between an obstacle and the sensor
and in this case the warning tone is solid.
The detection range and the volume of the buzzer can be adjusted (see “setting of
parameters”) according to the needs of the user and the vehicle on which the system is
installed.
The
sound alert will vary according to the distance and the detection
zone (front or rear).
stage-by-stage
For the overall functionality of the system, check the programming of all the sensors,
front and rear.
The parking system is designed only as a parking aid, it should not be considered to
replace care and attentiveness while manoeuvring.
Remember to always look around the vehicle while parking.
Small obstacles or objects with low reflectance might not be detected.
ZONE
ZONE
FC
F1
F2
RC
R1
R2
R3
DISTANCE
DISTANCE
35 cm
55 cm
80 cm
35 cm
55 cm
115 cm
160 cm
RC R1 R2 R3
F2 F2 FC
