PAG
E 4
3.0 - REMOTE CONTROL OPERATION
AND BATTERY REPLACEMENT
BUTTON 1:
COMPLETE SYSTEM ARMING
SYSTEM DISARMING
!
!
BUTTON 2:
SENSOR EXCLUSION
PANIC ALARM OR
BOOT OPENING
!
!
The remote control has a low charge battery indicator that gives
early warning to avoid manlfunctioning. If t
e only CR 16161 batteries. Different type batteries can
seriously damage the remote control unit. Discard used batteries
properly in special dedicated containers
he batteries are low, the
LED will start blinking when a button is pressed.
Us
.
To replace the battery proceed as follows:
!
!
!
Separate the remote halves taking care not to damage the internal circuit.
Remove discharged batteries and insert new ones taking care not to
invert the battery polarity.
Close the remote halves and make sure the remote control works properly.
