GEM 649 eSyDrive, Руководство по эксплуатации

Страница: 9 / 48

www.gemu-group.com 9 / 48 GEMÜ 649 eSyDrive
6 Reading out the RFID transponder
1. Press the On/Off key 4 on the CONEXO pen.
ð
The CONEXO pen has been switched on.
ð
LED 1 flashes.
2. Connect the CONEXO pen to the tablet.
ü
The user finds themselves in a menu within the CONEXO
app where a scanning operation is requested.
3. Hold the CONEXO pen directly against the RFID chip of a
component or functional location and press the scan key
8 .
ð
If an RFID chip has been scanned correctly, the LED 7
turns green.
ð
If an RFID chip has not been scanned correctly, the LED 5
turns red.
ð
An audible signal is emitted during a correct scan process.
ð
The data that is read out is transferred to the CONEXO
app.
4. Scan as many components as required.
5. Hold down the On/Off key
4 for at least three seconds.
ð
The CONEXO pen has been switched off.
6 Reading out the RFID transponder