GEM 649 eSyDrive Скачать руководство пользователя страница 13

8 Technical data

8.1 Medium

Working medium:

Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and

chemical properties of the body and diaphragm material.
For special oxygen version (code S):only gaseous oxygen

8.2 Temperature

Media temperature:

Diaphragm material

Standard

Special version

for oxygen

NBR (Code 2)

-10 — 100 °C

-

FKM (Code 4)

-10 — 90 °C

-

CR (Code 8)

-10 — 100 °C

-

EPDM (Code 13)

-10 — 100 °C

0 — 60 °C

EPDM (Code 17)

-10 — 100 °C

-

EPDM (Code 19)

-10 — 100 °C

-

EPDM (Code 29)

-10 — 100 °C

-

EPDM (Code 36)

-10 — 100 °C

-

PTFE/EPDM (Code 54)

-10 — 100 °C

-

PTFE/EPDM (Code 5M)

-10 — 100 °C

-

Sterilization temperature:

EPDM (Code 13)

max. 150 °C, max. 60 min per cycle

EPDM (Code 17)

max. 150 °C, max. 180 min per cycle

EPDM (Code 19)

max. 150 °C, max. 180 min per cycle

EPDM (Code 36)

max. 150 °C, max. 60 min per cycle

PTFE/EPDM (Code 54)

max. 150 °C, permanent temperature per cycle

The sterilization temperature is only valid for steam (saturated steam) or superheated water.

If the sterilization temperatures listed above are applied to the EPDM diaphragms for longer periods of time, the

service life of the diaphragms will be reduced. In these cases, maintenance cycles must be adapted accord-

ingly.

PTFE diaphragms can also be used as moisture barriers; however, this will reduce their service life. This also ap-

plies to PTFE diaphragms exposed to high temperature fluctuations. The maintenance cycles must be adapted

accordingly. GEMÜ 555 and 505 globe valves are particularly suitable for use in the area of steam generation

and distribution. The following valve arrangement for interfaces between steam pipes and process pipes has

proven itself over time: A globe valve for shutting off steam pipes and a diaphragm valve as an interface to the

process pipes.

Steam input

Steam distribution

Sterile process

Process pipe

Ambient temperature:

-10 — 60 °C

GEMÜ 649 eSyDrive

www.gemu-group.com

13 / 48

8 Technical data

Содержание 649 eSyDrive

















































Отзывы: