GEM 649 eSyDrive, Руководство по эксплуатации

Страница: 39 / 48

www.gemu-group.com 39 / 48 GEMÜ 649 eSyDrive
3
12
Item Name
3 Housing cover
12 Housing cover actuator
Starting point for manual override
Groove for actuator
5. Turn housing cover 3 anticlockwise.
ð
The product opens.
6. Turn housing cover 3 clockwise.
ð
The product closes.
7. Pull manual override off the starting point.
8. Ensure correct positioning of the O-ring.
9. Push actuator
12 into the groove provided for this pur-
pose.
10. Turn housing cover 3 anticlockwise until it stops.
ð
The actuator cover is closed.
11. Reconnect the power supply.
19 Inspection and maintenance
WARNING
The equipment is subject to pressure!
▶
Risk of severe injury or death.
●
Depressurize the plant.
●
Completely drain the plant.
CAUTION
Use of incorrect spare parts!
▶
Damage to the GEMÜ product.
▶
Manufacturer liability and guarantee will be void.
●
Use only genuine parts from GEMÜ.
CAUTION
Hot plant components!
▶
Risk of burns.
●
Only work on plant that has cooled
down.
NOTICE
Exceptional maintenance work!
▶
Damage to the GEMÜ product.
●
Any maintenance work and repairs not described in these
operating instructions must not be performed without
consulting the manufacturer first.
The operator must carry out regular visual examination of the
GEMÜ products depending on the operating conditions and
the potential danger in order to prevent leakage and damage.
The product also must be disassembled and checked for
wear in the corresponding intervals.
1. Have servicing and maintenance work performed by
trained personnel.
2. Wear appropriate protective gear as specified in plant op-
erator's guidelines.
3. Shut off plant or plant component.
4. Secure plant or plant component against recommission-
ing.
5. Depressurize the plant or plant component.
6. Actuate GEMÜ products which are always in the same po-
sition four times a year.
19 Inspection and maintenance