Geller TL-550, Руководство по эксплуатации

Страница: 27 / 88

N5 0 Do not add TAX4 for the department.
1 Add TAX4 to the department.
N6
0 Add no TAX.
1 Add TAX1.
2 Add TAX2.
3 Add TAX1 and TAX2.
4 Add TAX3.
5 Add TAX1 and TAX3.
6 Add TAX2 and TAX3.
7 Add TAX1, TAX2 and TAX3.
4.3 Setting PLU
This section describes the PLU function and how to program it. PLU is a function which
allows departments to be subdivided. For example, with PLU, you can have different
prices for one department. A maximum of 6000 PLU codes can be programmed. A unit
price can be preset and the department to which the PLU code belongs needs to be
assigned. When you enter a PLU code, the unit price which is programmed for the code is
automatically recalled.
Programming PLU Data
To program a PLU code, enter the unit price and name assign it to a department. Unit
prices of up to seven digits and name up to 16 characters can be used in a PLU code.
Setting Name of PLU
The name can be input max. 16 characters. (To correct wrong spelling, press
OVER WRITE
key, and move highlighted space by key, and then after the right letter is input, press
OVER WRITE
key again. If the displayed name is correct, press
ENTER
.
Setting Unit Price
The unit price can be input max. 7 digits. If the displayed name is correct, press
ENTER
.
Setting Barcode
Barcode numbers can be input manually, or programming with a barcode reader to read
the code is possible. Before programming with the barcode reader, the followings are
needed:
1) To enable barcode reader use for PLU, set the system flag 19, #4 to1 (5.1 Setting SYS-
TEM FLAG).
2) According to spec of your barcode reader, input the data (COM 1/2 SETUP).
4. P1 programming
19
1
2
3
4
5
6
7
8
9
10
11
12