Geller TL-550, Руководство по эксплуатации

Страница: 17 / 88

1
2
3
4
5
6
7
8
9
10
11
12
9
2. Setting Up
2.3 Installing and Removing a Paper Roll
This section describes how to install and remove a paper roll. When you install two ply
paper rolls in your cash register. One is for receipts and the other is for your records
(journal).
Before installing a paper roll, be sure to do the
following to avoid causing a paper jam:
Orient the paper roll so that it rotates in a
counterclockwise direction, as shown in
Fig.1
.
The end of the paper which will be inserted into
the printer must look like the one shown in
Fig.2
.
Do not insert a paper end that looks like the
ones shown in
Fig.3
.
Load paper with thermal head in the down
position.
If the paper skews, place the thermal head in the
up position (head up lever) and reset the paper.
If the thermal head has been in the down
position for a long time, it will be impossible to
insert because the head is in contact with the
platen. In this case, place the head in the up
position once and insert the paper again.
Installing a Paper Roll
To install a paper roll for receipts:
1 . Make sure the control lock is in the “R” position.
2 . From the front of the cash register, grab the rear of the
printer cover and lift it up (See
Fig.4
.).
Fig.2
Fig.3
To the Printer
Fig.1
Fig.4