3.0
SAFETY SIGNS
3.1 GRAPHIC CAUTION AND WARNING SYMBOLS
Suitable symbols for attracting the attention of those who must work on the machine are used in
this manual.
These symbols and their meanings are listed below:
ACCIDENT-PREVENTION RULES FOR THE OPERATOR AND THOSE WORKING IN THE VICINITY
POSSIBILITY OF CAUSING DAMAGE TO THE MACHINE AND/OR ITS COMPONENTS
FURTHER INFORMATION REGARDING THE OPERATION IN PROGRESS
WARNINGS
ANY MECHANICAL, HYDRAULIC, PNEUMATIC, ELECTRICAL AND ELECTRONIC TAMPERING OR
FAILURE TO OBSERVE THE ABOVE INSTRUCTIONS SHALL IMMEDIATELY NULLIFY THE WARRANTY
AND RELIEVE
Geko
OF ALL AND ANY CIVIL OR CRIMINAL RESPONSIBILITY FOR ANY DAMAGE OR
INJURY CAUSED BY THE MACHINE.
TO OPERATE, START UP, MANAGE AND MAINTAIN THE MACHINE IN QUESTION, THE USER MUST
SCRUPULOUSLY FOLLOW THE INSTRUCTIONS GIVEN IN ALL THE CHAPTERS OF THIS OPERATING
MANUAL.
ALL MAINTENANCE OPERATIONS AND WORK REQUIRED FOLLOWING ANY MACHINE FAILURE MUST
BE CARRIED OUT SOLELY BY RESPONSIBLE, PROFESSIONALLY QUALIFIED PERSONNEL.
THE MACHINE MUST BE INSTALLED AND USED WITH THE PROTECTIVE DEVICES MOUNTED AND THE
SAFETY DEVICES ACTIVATED, AS DESCRIBED IN CHAPTER 4.0 (SAFETY RULES) OF THIS MANUAL.
- THIS INSTRUCTION MANUAL MUST BE TREATED WITH CARE AND PUT IN A PLACE
THAT IS KNOWN AND EASILY ACCESSIBLE TO AUTHORISED PERSONNEL.
-THIS MANUAL MUST BE CAREFULLY READ BEFORE COMMENCING ANY OPERATION
ON THE MACHINE.
Metallwarenfabrik Gemmingen Telefon: 07267 / 806 193
Stromerzeuger
&
Telefax: 07267 / 806 198
Industriestr. 1 www.metalwarenfabrik.com
D – 75050 Gemmingen [email protected]
