GEKCO DIGITAL CLOCK P/N CLK100 ASSEMBLY & OPERATION MANUAL
14
REV 1.1
GEKCO INC.
sure the display is mounted flush with the board and oriented correctly and then solder the rest of the
pins.
( )
DS1: 7 segment LED display module
( )
DS2: 7 segment LED display module
( )
DS3: 7 segment LED display module
Make sure the LEDs are oriented correctly, there is a flat side on the LED housing or make sure the
long lead (anode) is inserted in the square hole and the short lead (cathode) in the round hole.
( )
LED1: LED Red PCB Mount
( )
LED2: LED Red PCB Mount
Note: LED3, LED4, LED5 and LED6 are not installed in this version of the display board.
( )
Solder the leads to the foil and cut off the excess lead lengths.
This completes the assembly of the Display Board. Connector J1 will be installed after the main board
assembly is almost complete. Set aside for the final assembly later.
Содержание CLK100
Страница 29: ...DIGITAL CLOCK MODEL CLK100 GEKCO INC Rev 1 1 29 Figure 25 Display Board Bottom Side...
Страница 30: ...GEKCO DIGITAL CLOCK P N CLK100 ASSEMBLY OPERATION MANUAL 30 REV 1 1 GEKCO INC 14 Schematic Main Board...
Страница 31: ...DIGITAL CLOCK MODEL CLK100 GEKCO INC Rev 1 1 31 15 Schematic Display Board...
