DIGITAL CLOCK MODEL CLK100
GEKCO INC.
Rev 1.1
19
( )
Unpack the enclosure parts kit, which
includes the front and back panels with bezels,
four 4-40 flat head screws and the base and
cover pieces.
( )
Slide the cover into the base as shown
in figure 14.
Figure 14: Enclosure Cover to Base Assembly
( )
Insert the front panel into one of the
bezels and attach to the enclosure front end as
shown in figure 15.
Figure 15: Front Panel
( )
Attach the front panel with the bezel to
the enclosure base with two 4-40 pan head
screws.
Figure 16: Front Panel to Base Assembly
( )
Slide the main and display board
assembly into the enclosure base from the
back end as shown.
Figure 17: Display and Main Board to Enclosure Assembly
( )
Insert the rear panel to the other bezel
and attach to the enclosure assembly with two
4-40 pan head screws. Be careful to make
sure the panel is aligned correctly so the switch
buttons can move freely.
Содержание CLK100
Страница 29: ...DIGITAL CLOCK MODEL CLK100 GEKCO INC Rev 1 1 29 Figure 25 Display Board Bottom Side...
Страница 30: ...GEKCO DIGITAL CLOCK P N CLK100 ASSEMBLY OPERATION MANUAL 30 REV 1 1 GEKCO INC 14 Schematic Main Board...
Страница 31: ...DIGITAL CLOCK MODEL CLK100 GEKCO INC Rev 1 1 31 15 Schematic Display Board...
