GEISMAR MPR-M, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 132

H90461 / NO 10055 HYDRAULIC RAIL THREADER
TYPE MPR – M
Chap. 1 — page 2
L.GEISMAR Company – Prohibited Reproduction©
1 – 2 Warning
It is necessary to have the formation, competences and the tools necessary to
use, maintain and repair correctly this equipment of work.
Before any use of the equipment of work, including in maintenance, imperatively to
take note of its note of instructions of use and maintenance, of its appendices and
regulations of safety in force on the work place.
Scrupulously to respect the general instructions of safety of the building site which are
given by the person in charge of the building site, particularly if work proceeds without
interruption of the traffic.
The use, the maintenance and the repair of the equipment of work could be realized
only by qualified personnel having received a thorough formation as a preliminary.
Technical documentation and the instructions will usefully come to supplement the
knowledge acquired at the time of training courses. But, they cannot in no case to
replace a formal training and practical qualifying, exempted according to the rules of
Article.
If the owner does not feel able to ensure correctly the aforementioned formation his
personnel, which falls on to him, the GEISMAR Company, is at its disposal for councils
relating to the program of this formation. The formation must cover the explanation with
the various functions of the material, the instructions of use, maintenance and the
safety regulations to be respected, as well as the practical exercises.
1 – 3 General safety instructions
The equipment shall be used under normal operating conditions and it shall be
adequately maintained.
Do not use or carry out maintenance operations without adequate training delivered by
qualified personnel, preferably with additional work placement period to get familiar
with the equipment.
Do not start using this equipment unless you know and master all safety features and
conditions, for yourself and for others.
If you have question about equipment operation or work tasks, contact qualified
personnel for information.
Never use the equipment for tasks other than those intended for this equipment.
To prevent accidents or injuries, wearing individual protection clothing and equipment
conforming to safety regulations of the site is required.
The following protection equipment is required:
– Girdle or reflective jacket.
– Boots with steel ends and non-skid soles.
– Helmet.
Or any other equipment required on the building site or for operating the
equipment.
Always keep hands away from moving parts until the equipment is out of service or in a
safe condition. All moving parts of this equipment can crush or shear lower/upper
limbs.
Equipment shall be cleaned on a regular basis, with liquid or grease dirt removed.
All safety signs shall be kept clean and readable at all times; sign plates shall never be
removed of the equipment.