2
Gerhard Geiger GmbH & Co. KG | 100W2580
0322
V000
en
EN
EN
1. General information
Dear customer,
By purchasing a GEIGER motor you have decided on a quality product from GEIGER.
Thank you very much for your decision and the confidence placed in us.
Before you put this drive into operation please observe the following safety instructions. It
serves for the prevention of danger and for the avoidance of personal injury and damage to
property.
The installation and operating instructions contain important information for the installer, the
specialist electrician and the user. Please pass on these instructions if you transfer the product.
These instructions should be kept by the user.
2. Guarantee
In the case of incorrect installation contrary to the installation and operating instructions and/
or constructional modification, the legal and contractual guarantee for property damage and
product liability lapses.
Index
1. General information ..................................................................2
2. Guarantee ..................................................................................2
3. Intended use ..............................................................................3
4. Safety instructions ....................................................................3
5. Safety instructions for assembly ............................................4
6. Installation instructions ...........................................................5
7. Information for the specialist electrician ................................6
8. Connection of the setting switch ............................................6
9. Starting the setting modes .......................................................7
10. Factory settings ........................................................................7
11. Automatic setting of the end positions ..................................7
12. Manual programming of the end positions ............................8
13. Semi-automatic programming of the end positions ..............8
14. Exit the programming modes ..................................................8
15. Change/delete the end position ..............................................8
16. Obstacle detection ....................................................................9
17. Referencing / End position correction ..................................10
18. Resetting to factory setting ...................................................10
19. What to do if… .........................................................................10
20. Maintenance ............................................................................10
21. Declaration of conformity ......................................................11
22. Technical data for SOLIDline motors ....................................12
23. Notes on waste disposal ........................................................12