34
Maintenance
Lamp Warning
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
WARNING
The projector uses a high-pressure mercury lamp. The explosion of lamp with a
loud bang or burn out could possibly cause injury or a fire.When the bulb bursts,
it is possible for shards of glass to fly into the lamp housing; and for gas
containing mercury to escape from the projector’s vent holes.If the lamp has
broken, do not check the inside of the projector. Please ventilate the room
immediately. Do not touch or bring your face close to the broken pieces since it
might get into your eyes or mouth. In case of injury, seek medical advice
immediately.
DISPOSAL OF A LAMP
Dispose of a lamp in accordance with the local recycling laws.
Do not put it to your trash.
Recycling Lamp’s laws of the USA, go to www.lamprecycle.org.
Recycling Product’s laws of the USA, go to www.eiae.org.
Recycling Product’s laws of Canada, go to www.epsc.ca.
For more information about recycling laws, please contact local government
agency or dealer.
CAUTION HOT
Before replacing the Lamp part, pay attention to the following items:
1. The Lamp is optional part. Contact the dealer for replacement lamp.
2. The lamp becomes very hot when in use. Turn the power off and disconnect
the power cord.
3. Wait 1 Hour before replacing the Lamp.
4. Do not use old lamp part.