12
Putting batteries
Remote control
Please set the batteries to the remote control before using it. If the remote control starts
to malfunction, try to replace the batteries. If you will not use the remote control for long
period, remove the batteries from the remote control and store them in a safe place.
1.
Remove the battery cover.
Slide back and remove the battery cover in the
direction of the arrow.
2.
Insert the batteries.
Align and insert the two AAA batteries according
to their plus and minus terminals.
3.
Close the battery cover.
Replace the battery cover in the direction of the
arrow and snap it back into place.
WARNING
►Always handle the batteries with care and use them only as dir
ected.
Improper use may result in battery explosion, cracking or leakage, which could
result in fire, injury and/or pollution of the surrounding envir
onment.
►Be sure to use only the batteries with the mentioned specifica
tion.
►Do not use batteries of different types at the same time.
►Do not mix a new battery with used one. Make sure the plus and
minus
terminals are correctly aligned when loading a battery.
►Keep a battery away from children and pets.
►Do not recharge, short circuit, solder or disassemble a batter
y.
►Do not allow a battery in a fire or water.
►Keep batteries in a dark, cool and dry place. If you observe a
leakage of a
battery, wipe out and then replace a battery. If it adhere your body or clothes,
rinse well with water immediately.
►Dispose of batteries in accord with environmental laws.
About the
B
attery
