10
Setting up
Connecting power supply
WARNING
►Please use extra caution when connecting the power cord, as incorrect or
faulty connections may result in fire and/or electrical shock.
►Only use the power cord that came with the projector. If it is damaged,
contact your dealer soon.
►Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range. The power outlet should be close to the projector
and easily accessible. Remove the power cord for complete separation.
►Never modify the power cord.
Using the Security Anchor
WARNING
►Do not use the security anchor to prevent the projector from falling down or
held, since it is not designed for it.
NOTE
►The security anchor is not comprehensive theft prevention measures.
It is intended to be used as supplemental theft prevention measure.
Outlet
AC inlet
1.
Connect the connector of the power cord
to the AC inlet of the projector.
2
.
F
irmly plug the power cable
’
s plug into
the outlet.
T
he POWER indicator will
begin blinking in green.
T
he projector
work on stand by mode.
POWER indicator
Security Anchor
T
he product was designed security
anchor and PIN
L
O
C
K functions
(
SEE P
31
)
to help prevent
unauthori
z
ed removal projector.
power cable
