gefran GEFLEX Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 17

gefran GEFLEX Скачать руководство пользователя страница 17

10.1 Accessories

Software for management / configuration of Geflex units.

The main parameters of all Geflex models can be varied with a simple, intuitive interface.

ORDER CODE

Winstrum software on CD, RS232/485 converter complete
with cables to connect the PC and the Geflex . . . . . . . . . . . . . . . . . . . . .WSK - 1 - 1 - 0

Winstrum software on CD, IRDA interface for Geflex . . . . . . . . . . . . . . .WSK - 1 - 2 - 0

[Note: the PC used must be equipped with an IRDA (infrared) interface]

KIT WINSTRUM

Operator terminal for field configuration of the entire Geflex range

Two types of terminals are available:

- for installation on the Geflex heatsink or on DIN guide
- for installation on the faceplate

Programming terminal for Geflex (installation on DIN guide or on heatsink),
complete with connection cable to Geflex (L = 0.2 m) . . . . . . . . . . . . . . . . . . .GFX-OP-D

Note: see cable section for other cable lengths

Programming terminal for Geflex (installation on faceplate) . . . . . . . . . . . . . . .GFX-OP-P

Note: see cable section for connection cable

Kit consists of:
power supply, connection cable PC <--> GFX-DP-D (L = 2 m),
power adapter for the Geflex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GFX-OP-K

GFX-OP

ORDER CODE

Series of modules insertable on base

Double relay module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GFX-OUT-RR

MODULES

ORDER CODE

Note: See the Geflex catalog for more accessories.

17

80346B_MHW_GFX-VALVOLE_0709_ENG

«
...
15
16
17

Содержание GEFLEX


















Отзывы:

Нет отзывов