Gefen EXT-DVIKVM-241DL, Руководство пользователя

Страница: 9 / 20

5
1 Power
This LED will glow bright red once the included 5V DC locking power supply has
been connected and plugged into an available electrical outlet.
2 IR Sensor
Receives IR commands from the included IR Remote Control Unit.
3 Source Selection Indicators
These LED indicators will glow bright blue depending upon which input source is
selected. Use the Select button to select the input source.
4 Select
Press this button to toggle between DVI In 1/ USB In 1 and DVI In 2 / USB In 2.
5 5V DC
Connect the included 5V DC power supply to this connector.
6 Audio In 1 / Audio In 2
Connect the included 3.5mm mini-stereo cables from each computer / audio
source to each of these 3.5mm mini-stereo jacks.
7 DVI Out
Connect a DVI cable from the extender to an HDTV display.
8 Audio Out
Connect a 3.5mm mini-stereo cable from this jack to the audio/video output
device.
9 DVI In 1 / DVI In 2
Connect the included DVI cables from each computer source to each of these
DVI connectors.
10 Remote
Used for contact-closure control. See page 10 for details.
11 USB Out
Connect up to two USB device to these USB ports. Both of these USB ports are
active, depending upon the USB inputs.
12 USB In 1 / USB In 2
Connect the included USB cables from each computer source to these USB
ports.
PANEL DESCRIPTIONS