Gefen EXT-DVIKVM-241DL, Руководство пользователя

Страница: 16 / 20

12
OPERATING THE 2X1 DVIKVM DL SWITCH
2. Locate DIP switch 3. By default, this DIP switch will be in the OFF (down)
position.
3. Adjust DIP switch 3 to the desired position.
DIP switch 3 Mode
OFF (default) Toggle mode
ON Discrete mode
NOTE: When DIP switch 3 is set to the ON position, then the 2x1
DVIKVM DL Switch will no longer receive IR commands from the IR
Remote Control unit. DIP switch 3 must be set to the OFF (
toggle
mode ) position to enable IR control.
DIP 3 in the OFF
position