Gefen EXT-DVIKVM-241DL, Руководство пользователя

Страница: 17 / 20

13
OPERATING THE 2X1 DVIKVM DL SWITCH
Setting the IR channel on the 2x1 DVIKVM DL Switch
The IR channel on the 2x1 DVIKVM DL Switch must match the IR channel used
by the IR Remote Control unit. Use DIP switch 1 and DIP switch 2 to set the
appropriate IR channel on the 2x1 DVIKVM DL Switch . Refer to page 7 for
information on setting the IR channel on the IR Remote Control unit.
Using the IR Extender (not included)
1. On the bottom of the 2x1 DVIKVM DL Switch, locate the DIP switch bank
and set DIP switch 4 to the ON position.
2. Connect the IR Extender (Gefen part no. EXT-RMT-EXTIR) to the Remote
jack on the 2x1 DVIKVM DL Switch.
3. Point the IR Remote Control unit at the IR Extender to control the 2x1
DVIKVM DL Switch.
Remote Channel 2: Remote Channel 3:
Channel 0 (default): Remote Channel 1:
1 2
ON
1 2 1 2
1 2 1 2
ON
ON ON
DIP 1 and 2 control
the IR channel
Set DIP 4 to the ON
position