page | 43
RS-232 Commands
Advanced Operation
#save
The
#save
command saves all the current parameter settings to the PROM.
These parameters will be reloaded upon the next boot up.
Syntax
:
#save
Parameters
:
None
#sizepos
The
#sizepos
command sets the size and the position of the image. This option is not
available when the Aspect Mode is set to Panoramic.
Syntax
:
#sizepos param1 param2 param3 param4
Parameters
:
param1
Horizontal size
[1 ... max]
param2
Vertical size
[1 ... max]
param3
Horizontal position
[0 ... max]
param4
Vertical position
[0 ... max]
Notes:
Use the following formulas to calculate the maximum values for each parameter:
param1
:
Current horizontal resolution - current horizontal position
param2
:
Current vertical resolution - current vertical position
param3
:
Current horizontal resolution - current horizontal size
param4
:
Current vertical resolution - current vertical size
