page | 7
Connecting the HDMI and DVI to 3GSDI Scaler
1. Use the included locking HDMI cable to connect a Hi-Def source to the HDMI In port
on the scaler.
2. Connect the included dual link DVI cable from the scaler to a DVI source.
3. Connect a BNC-type cable from the Genlock connector to an external clock reference.
4.
Connect a coax cable from the Coax Out connector to an external audio amplifier.
5.
Connect a BNC-type cable from the 3GSDI Out connector(s) to the 3GSDI destination.
6. Connect the included AC power cord from the power supply to an available electrical
outlet.
Sample Wiring Diagram
WARNING:
This product should always be connected to a grounded
electrical AC outlet.
DVI Source
3G-SDI Display
HDMI Source
GEF-HDVI-2-3GSDIS
BNC Coaxial CABLE
HDMI CABLE
00:
00:
00
Clock Generator
RS-232 Controller
Audio Processor
S/PDIF CABLE
DVI CABLE
DB-9 CABLE
Scaler
Getting Started
Installation
NOTE:
In order to output dual link 1080p Full HD, when using
HD-SDI, both Out A and Out B must be connected to the destination.
