GEDA STAR 200 STANDARD, Сборка и руководство по эксплуатации

Страница: 15 / 38

Swivel Arm Hoist GEDA STAR 200 STANDARD / GEDA STAR 250 COMFORT
9 Installation
The swivel arm hoist must be installed according to the assembly and
operating instructions under the guidance of a qualified person
specified by the company!
This qualified personnel must be acquainted with the assembly and operating manual,
have sufficient experience and be informed about the risks involved in working with
the swivel arm hoist.
9.1 Safety notes
Assembly personnel , see Chp. 3

Before any installation, check whether the main rope, mains feed line and control with
cable are in faultless condition. If there is any damage, do not start the swivel arm hoist!
- Immediately replace damaged parts.

Acquaint yourself with the working environment at the place of utilisation, e.g. obstacles in
the work and traffic area and necessary safeguarding of the construction site from public
transport.

Cordon off the danger zone of the swivel arm hoist (red-white chain, etc.) and label with a
warning sign as shown.
Do not stand or work beneath the hanging load!

Observe swivel arm hoist lifting capacity:

Comply with the national accident prevention guidelines from the industrial safety
authorities and all applicable laws and guidelines.

Wear personal protective gear (e.g. hard hat, safety boots).

Entering the load suspension device is forbidden.

Conveying persons is forbidden!
Assembly and Operating Manual Page 15 of 38 BL107 GB Edition 01.2010