CONNECTING THE POWER SUPPLY
Connect the supplied 10-pin DC power cable to the MAIN POWER DC INPUT on the console and to DC
OUT at the rear of the JORDAN PS 2410U.
SWITCHING THE CONSOLE ON AND OFF
It is a good practice to turn power amplifiers off before switching the console and other connected equipment
on or off. This prevents any unexpected clicks or thumps when the equipment is powered up.
CAUTIONS:
Turn power amplifiers and powered speakers on last and off first.
Turn the EXODUS ODYSSEY MXR 5204L console on and off using the ON/OFF power switch on the front
of the JORDAN PS 2410U (there is no separate ON/OFF switch on the MXR 5204L console itself). The red
neon indicator on the front panel of the JORDAN PS 2410U will illuminate to show the JORDAN PS 2410U
universal power supply is powered up. The green POWER ON LED indicator on console front panel will
illuminate to show the console is switched on.
To turn the MXR 3604L on, press the ON/OFF button found at the rear panel of the console. The green
MAIN LED / ACTIVE POWER SUPPLY next to the ON/OFF button will illuminate to show main power supply
is in operation. The green POWER ON LED indicator on console front panel will illuminate to show the
console is switched on.
CONNECTING A BACKUP SUPPLY
A second power socket, labelled “BACKUP POWER DC INPUT” is included for plugging in an optional power
supply. This provides the reassurance of power supply dual redundancy, a feature usually found only on
expensive top end consoles. The console uses Diode Combining technology so that both supplies can be
powered at the same time. One will automatically take over should the other be switched off or stopped
working. The recommended backup supply for the EXODUS ODYSSEY MXR 5204L is a second JORDAN
PS 2410U and JORDAN PS 2310U for EXODUS ODYSSEY MXR 3604L.
CAUTIONS:
Use only the recommended power supply unit. Do not attempt to
modify any other power unit to work with the console. Do not attempt to modify or
extend the DC power cable that comes with the supply.
______________________________________________________________________________________
8
8
© GECKO MUSIC GROUP. All Rights Reserved.
For safety it is important that all equipment grounds are connected to mains grounds
so that exposed metal parts are prevented from carrying high voltage which can
injure or even kill the operator. Do not disconnect the ground on the mains lead. It is
recommended that the system engineer check the continuity of the safety ground
from all the points in the system including microphone bodies, turntable chassis,
equipment cases, rack metalwork and so on.
